A lot of home remodel projects call for new hardwood floors in additions, repair of areas where walls were removed and refinishing of the existing floors. It takes a skilled craftsman to identify the type of hardwood floors you have in order to get a match to your 100 year old floor. We got a call just for that type of project in the Berkeley area. The kitchen had old and worn vinyl floor and the home owner wanted to replace that with new hardwood floors to match what was in the rest of the house. A quick look around and I determined the floors were solid top nail white oak. Original to the home, those floors had seen quite the use and a lot of sun light over the years. I recommended using the same white oak floors in the kitchen with the only difference of a tongue and groove product instead of a top nail. The owners agreed to my recommendation and accepted the quote. We then scheduled the delivery date for the wood to acclimate properly to the home. Approximately a week after that we removed the old floor in the kitchen and installed the new white oak floors. We took the time to sand and seal the appliances areas so that they could be installed back in place immediately. That way the home owners didn’t need to worry about the appliances being installed after the floors were all finished and accidently scratching them. After we completed the install we checked the moisture content in the new wood, comparing it to the moisture content in the existing hardwood floors. That gave us a good idea of how long we had to wait before sanding and finishing the new white oak floors. We came back about a week later to sand the new white oak floor in the kitchen and the existing floors in the dining room. The owners stayed somewhere else while the finishing was taking place for a week. This was phase one of two to refinish the floors in the entire first floor. With having no place to put the furniture, a full schedule and young kids in the house we all decided to plan out and schedule the second phase later in the year. The finish on the older floors was a one component low solids water base. The finish faded over the years and was completely worn by the time we got there to do the work. When we were done the big difference in finish qualities and look was obvious to the untrained eye ever before. Four coats of high solid polyurethane showed a smooth, clear and rich looking finish, providing this family with a floor to be used for years to come.